Overview

The QualiFi™ 5000 Galaxy Series is an advanced MFI Melt Flow Indexer made to figure out the melt flow characteristics of all sorts of polymers. It works just as well with high-temperature engineering plastics like polycarbonate as it does with everyday materials like polyethylene and polypropylene.

This system makes testing more efficient with its modern user interface and exceptionally stable temperature controls, giving you dependable information that lines up with ASTM D1238 and ISO 1133 methods.

Features & Benefits

• Exceptionally Stable Temperature: A smart heat distribution system keeps temperature swings to just ±0.1°C, which means your test conditions are always just right for getting good information.

• Flexible Dual Control: Run tests using either the built-in touchscreen or a connected PC, with all your information syncing in real-time. The software is set up to guide you through each step, making it simple to get started.

• Fully Automated Workflow: The system takes care of the whole process, from automatic sample cutting and calibration to calculating the final MFR and MVR values, which frees up your team's time.

• Handles High-Flow Materials: Comes with a specially made die plug that creates a tight seal, stopping any sample overflow when you're working with high-flow-rate polymers.

• Smart Data Management: All your test information, including real-time graphs, can be saved and moved over to a computer with a USB stick. The included software helps you look over past tests and create reports.

 

QualiFi™ 5000 Galaxy Series MFI Melt Flow Indexer Technical Specifications:

Function Characteristics
Test Method	MFR/MVR
Measuring Range	(0.1 ~ 100)g/10min / (0.01 ~ 3000)cm³/10min
Display	Full color touch screen
Cutting Method	Automatic
Temperature Range	50°C ~ 450°C
Temperature Resolution	0.01°C
Temperature Error	≤±0.2°C
Temperature Fluctuation	≤±0.2°C
Timer Error	≤±0.2%
Load Error	≤±0.3%
Temperature Deviation with Distance from 0mm to 70mm above the Die	≤±0.3°C
The Time for Rapid Recovery of Constant temperature State After Filling	≤2min
Piston Displacement Measuring Error	≤±0.02mm
Weight	0.325kg, 1.20kg, 2.16kg, 3.80kg, 5.00kg, 10.00kg, 21.60kg
Internal Diameter of Cylinder	9.550mm ± 0.007mm
Piston	Head Diameter: 9.474mm ± 0.007mm
	Bottom Corner Radius: R0.40-0.1
Die	Internal Diameter: 2.095mm ± 0.005mm
	Length: 8.000mm ± 0.025mm
Half Die	Internal Diameter: 1.050mm ± 0.005mm
	Length: 4.000mm ± 0.025mm
Note: Half Die optional.
Electrical Requirement
Voltage	220V (1±10%) VAC, 50Hz, 500W (single phase three wires) (110V is also available)
Grounding Requirements	According to local regulations
Working Condition
Environment Temperature	10°C ~ 40°C
Relative Humidity	30% ~ 80%
Note: The instrument should be fixed on a sturdy base, free from vibration, and operate without strong electromagnetic interference or strong air convection.
Dimension and Weight
Net Dimension	555mm × 440mm × 840mm
Weight	75kg

 

Standard Configuration

Name	Quantity
Main Unit	1 set
Accessories Box (including following items)	1 set
Piston Rod	1
Die	1
Die Cleaning Tool	1
Cut-off Knife	1
Cleaning Tool	1
Charging Tool	1
Lever Meter	1
Guiding Bushing	1
Funnel	1
Cylinder	1
Spanner	1