UL 94 Flammability Tester for Plastics & Rubber
Overview
This piece of equipment is made for running a dependable flammability test for plastics and rubber materials. It is put together to follow the strict guidelines of the UL 94 standard, giving you a complete setup for checking both how materials burn horizontally and vertically.
The system is built inside a strong stainless steel housing and gives you very exact command over the flame and gas flow, which is exactly what you need to get the solid information required for product safety and making sure you meet regulations.
Features & Benefits
-
Adaptable Flame Setup: Gives you the ability to tilt the flame to 0, 20, and 45-degree positions and move it with a simple sliding system. This lets you set up tests that exactly match different international standards, making it a very versatile tool for your lab.
-
Correct Sample Positioning: Comes with different sample holders for vertical and horizontal checks, making sure your items are held just right for dependable and repeatable information every single time.
-
Exact Gas and Heat Management: Gives you very fine command over the gas mixture with built-in flowmeters and lets you check the flame's temperature with a digital thermometer, which is a key part of getting good information that lines up with the UL 94 method.
-
Long-Lasting and Safe Build: The main body is put together from tough stainless steel and includes a fan to pull away fumes from the test area, which makes for a durable piece of equipment that helps keep your workspace safe.
| Reference Standards | |
|
STANDARDS THE FLAMMABILITY TESTER FOR RUBBER AND PLASTICS COMPLIES WITH: ASTM D4986; ASTM D3801; ASTM D4804; ASTM D5048; ASTM D635; ISO 1210; ISO 9773; ISO 8030; ISO 9772; UL 94; IEC 60695-11-10; VDE VDE 0471-11-11; |
|
| Testing Configuration | |
|
TYPES OF TEST THAT CAN BE PERFORMED HBF (Horizontal Burning Foamed Material), HB (Horizontal Burning), MVB (Material Vertical Burning), VB (Vertical Burning) |
TEST CABINET Stainless steel cabinet with tempered glass viewing window and internal light. |
|
BURNER Conforming to ASTM D5025 and CEI IEC 60695-11-4 standards. With support for flame angle set (0°, 20°, 45°). |
TEMPERATURE CONTROL Internal Digital thermometer in conformity with ASTM D 5207 standard |
|
GAS FLOW REGULATION (METHANE) Integrated Flow meter |
TIMER Digital Timer with 0.1 sec. resolution. The timer permits to set the flame exposition time. At the end of the countdown for flame exposition, the timer permits to count flame extinction time. |
|
SLIDE FOR THE REGULATION OF THE POSITION The slide is controlled by an external handle that permits to move the burner inside the chamber. |
ASPIRATION OF FUMES Exhaust fan to remove fumes at the end of the test |
| Safety Devices | |
|
SAFETY DEVICES Safety valve for gas flow interruption without flame |
LABELLING CE Labelling |
| Calibration | |
|
CALIBRATION Calibration Report conforming to UL 94 with traceability to primary standards |
CALIBRATION OF TEST FLAME Internal Thermometer with thermocouples for 20 mm Test Flame according to ASTM D 5207 standard. |
| Technical specifications | |
|
POWER 220 VAC ±10%,50 Hz ±3,4 A,single phase, 40 W - 110 VAC ±10%, 60 Hz ±3 on request |
GAS SUPPLY The Flammability Tester for Rubber and Plastics must be connected to a Methane Source or Methane Cylinder. |
|
INTERNAL DIMENSION (W x D x H) 850 x 700 x 812 mm |
EXTERNAL DIMENSION (W x D x H) 925 x 800 x 1235 mm |
|
WEIGHT 92 kg |
|
Product Information
Product Information
Shipping & Returns
Shipping & Returns
UL 94 Flammability Tester for Plastics & Rubber
UL 94 Flammability Tester for Plastics & Rubber
Overview
This piece of equipment is made for running a dependable flammability test for plastics and rubber materials. It is put together to follow the strict guidelines of the UL 94 standard, giving you a complete setup for checking both how materials burn horizontally and vertically.
The system is built inside a strong stainless steel housing and gives you very exact command over the flame and gas flow, which is exactly what you need to get the solid information required for product safety and making sure you meet regulations.
Features & Benefits
-
Adaptable Flame Setup: Gives you the ability to tilt the flame to 0, 20, and 45-degree positions and move it with a simple sliding system. This lets you set up tests that exactly match different international standards, making it a very versatile tool for your lab.
-
Correct Sample Positioning: Comes with different sample holders for vertical and horizontal checks, making sure your items are held just right for dependable and repeatable information every single time.
-
Exact Gas and Heat Management: Gives you very fine command over the gas mixture with built-in flowmeters and lets you check the flame's temperature with a digital thermometer, which is a key part of getting good information that lines up with the UL 94 method.
-
Long-Lasting and Safe Build: The main body is put together from tough stainless steel and includes a fan to pull away fumes from the test area, which makes for a durable piece of equipment that helps keep your workspace safe.
| Reference Standards | |
|
STANDARDS THE FLAMMABILITY TESTER FOR RUBBER AND PLASTICS COMPLIES WITH: ASTM D4986; ASTM D3801; ASTM D4804; ASTM D5048; ASTM D635; ISO 1210; ISO 9773; ISO 8030; ISO 9772; UL 94; IEC 60695-11-10; VDE VDE 0471-11-11; |
|
| Testing Configuration | |
|
TYPES OF TEST THAT CAN BE PERFORMED HBF (Horizontal Burning Foamed Material), HB (Horizontal Burning), MVB (Material Vertical Burning), VB (Vertical Burning) |
TEST CABINET Stainless steel cabinet with tempered glass viewing window and internal light. |
|
BURNER Conforming to ASTM D5025 and CEI IEC 60695-11-4 standards. With support for flame angle set (0°, 20°, 45°). |
TEMPERATURE CONTROL Internal Digital thermometer in conformity with ASTM D 5207 standard |
|
GAS FLOW REGULATION (METHANE) Integrated Flow meter |
TIMER Digital Timer with 0.1 sec. resolution. The timer permits to set the flame exposition time. At the end of the countdown for flame exposition, the timer permits to count flame extinction time. |
|
SLIDE FOR THE REGULATION OF THE POSITION The slide is controlled by an external handle that permits to move the burner inside the chamber. |
ASPIRATION OF FUMES Exhaust fan to remove fumes at the end of the test |
| Safety Devices | |
|
SAFETY DEVICES Safety valve for gas flow interruption without flame |
LABELLING CE Labelling |
| Calibration | |
|
CALIBRATION Calibration Report conforming to UL 94 with traceability to primary standards |
CALIBRATION OF TEST FLAME Internal Thermometer with thermocouples for 20 mm Test Flame according to ASTM D 5207 standard. |
| Technical specifications | |
|
POWER 220 VAC ±10%,50 Hz ±3,4 A,single phase, 40 W - 110 VAC ±10%, 60 Hz ±3 on request |
GAS SUPPLY The Flammability Tester for Rubber and Plastics must be connected to a Methane Source or Methane Cylinder. |
|
INTERNAL DIMENSION (W x D x H) 850 x 700 x 812 mm |
EXTERNAL DIMENSION (W x D x H) 925 x 800 x 1235 mm |
|
WEIGHT 92 kg |
|
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Overview
This piece of equipment is made for running a dependable flammability test for plastics and rubber materials. It is put together to follow the strict guidelines of the UL 94 standard, giving you a complete setup for checking both how materials burn horizontally and vertically.
The system is built inside a strong stainless steel housing and gives you very exact command over the flame and gas flow, which is exactly what you need to get the solid information required for product safety and making sure you meet regulations.
Features & Benefits
-
Adaptable Flame Setup: Gives you the ability to tilt the flame to 0, 20, and 45-degree positions and move it with a simple sliding system. This lets you set up tests that exactly match different international standards, making it a very versatile tool for your lab.
-
Correct Sample Positioning: Comes with different sample holders for vertical and horizontal checks, making sure your items are held just right for dependable and repeatable information every single time.
-
Exact Gas and Heat Management: Gives you very fine command over the gas mixture with built-in flowmeters and lets you check the flame's temperature with a digital thermometer, which is a key part of getting good information that lines up with the UL 94 method.
-
Long-Lasting and Safe Build: The main body is put together from tough stainless steel and includes a fan to pull away fumes from the test area, which makes for a durable piece of equipment that helps keep your workspace safe.
| Reference Standards | |
|
STANDARDS THE FLAMMABILITY TESTER FOR RUBBER AND PLASTICS COMPLIES WITH: ASTM D4986; ASTM D3801; ASTM D4804; ASTM D5048; ASTM D635; ISO 1210; ISO 9773; ISO 8030; ISO 9772; UL 94; IEC 60695-11-10; VDE VDE 0471-11-11; |
|
| Testing Configuration | |
|
TYPES OF TEST THAT CAN BE PERFORMED HBF (Horizontal Burning Foamed Material), HB (Horizontal Burning), MVB (Material Vertical Burning), VB (Vertical Burning) |
TEST CABINET Stainless steel cabinet with tempered glass viewing window and internal light. |
|
BURNER Conforming to ASTM D5025 and CEI IEC 60695-11-4 standards. With support for flame angle set (0°, 20°, 45°). |
TEMPERATURE CONTROL Internal Digital thermometer in conformity with ASTM D 5207 standard |
|
GAS FLOW REGULATION (METHANE) Integrated Flow meter |
TIMER Digital Timer with 0.1 sec. resolution. The timer permits to set the flame exposition time. At the end of the countdown for flame exposition, the timer permits to count flame extinction time. |
|
SLIDE FOR THE REGULATION OF THE POSITION The slide is controlled by an external handle that permits to move the burner inside the chamber. |
ASPIRATION OF FUMES Exhaust fan to remove fumes at the end of the test |
| Safety Devices | |
|
SAFETY DEVICES Safety valve for gas flow interruption without flame |
LABELLING CE Labelling |
| Calibration | |
|
CALIBRATION Calibration Report conforming to UL 94 with traceability to primary standards |
CALIBRATION OF TEST FLAME Internal Thermometer with thermocouples for 20 mm Test Flame according to ASTM D 5207 standard. |
| Technical specifications | |
|
POWER 220 VAC ±10%,50 Hz ±3,4 A,single phase, 40 W - 110 VAC ±10%, 60 Hz ±3 on request |
GAS SUPPLY The Flammability Tester for Rubber and Plastics must be connected to a Methane Source or Methane Cylinder. |
|
INTERNAL DIMENSION (W x D x H) 850 x 700 x 812 mm |
EXTERNAL DIMENSION (W x D x H) 925 x 800 x 1235 mm |
|
WEIGHT 92 kg |
|
